PiTFT Plus 480×320 3.5″ TFT+Touchscreen for Raspberry Pi – Pi 2 and Model A+ / B+

$37.71 (as of September 23, 2017, 10:44 pm)

This PiTFT 3.5″ is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B
Comes fully assembled and ready to plug into your Pi! (See not below)
You can also have an HDMI display separately connected.(This may be required during initial setup)

View on Amazon

Category:

Description

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the Raspberry Pi 2 and the Model A+ / B+. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!

This PiTFT 3.5″ is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+. If you’d like to use a 3.5″ display with the original Pi A or Pi B, check out this version

The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There’s a 2×16 ‘classic Pi’ connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO.

Best of all, it comes fully assembled and ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There’s four mounting ears that can be used to attach the display & Pi to a bezel, or snap them off with pliers (they’re perforated) for a slick exactly-the-same-size-as-a-Pi look.

Adafruit created a custom kernel package based of off Notro’s awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Adafruit’s tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!

Please visit Adafruit for more information
This PiTFT 3.5″ is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B
Comes fully assembled and ready to plug into your Pi! (See not below)
You can also have an HDMI display separately connected.(This may be required during initial setup)
Features a 3.5″ display with 480×320 16-bit color pixels and a resistive touch overlay
Important Note: This product requires configuration and driver setup to work correctly on the PI and is not “plug and play”. Many users report a “white” screen indicating the PI has not been configured correctly. Please see Adafruit Documentation or contact the seller if you experience this issue. Raspberry Pi Not included

Additional information

Binding

Brand

EAN

EANList

ItemDimensions

Label

Manufacturer

Model

MPN

PackageDimensions

PackageQuantity

PartNumber

ProductGroup

ProductTypeName

Publisher

Studio

UPC

UPCList